Varmia-3 stripping powder

Use

The screen printing screen printing photoresist is peeled off, so that the screen can be reused and the cost is saved.

Traits

White, granular crystals.

Performance characteristics

1. Good peeling property to solvent-resistant emulsions.

2. Applicable to polyester, stainless steel wire mesh, etc., will not affect the life of the screen.

3. Stripping speed is fast and the production efficiency is improved.

Instructions  

1. Strip the film powder and mix well with 8-10 liters of water.

2. Apply the stripping solution to the P side and S side of the screen with a sponge or a rag or soak the screen in the stripping solution tank for 2-3 minutes, and rinse with a water gun when the stripping solution is not completely dry.

3. The ink on the screen should be thoroughly cleaned before stripping.

Precautions  

This product should be stored in a dry, dark place, irritating to the skin, if you accidentally contact the skin, please rinse with water.

Specifications: 1KG / tank 10 cans / box